BO KATAN Mandalorian jetpack (2024)

PLEASE READ:

This is a 3D printable file for a Bo-Katan Jetpack as seen on the Mandalorian series. I have done my best to scale this model exactly to the dimensions as the prop on the show. Please note that this is a 3D file and not a physical product. The files will become available to you as soon as payment is complete.

This pack is scaled to life size measuring approximately 13 inches tall and 12 inches wide. Note that scaled to its original size, this pack is one of the smallest of any of the mandalorian packs. Scale the model to your needs accordingly.

I have included three different options for printing. The first option has the main portion of the pack (with loops for mounting) split into four separate parts to make printing on a smaller bed possible. The split version offers the rocket and vent portion that need to be printed separately as well. The second option is the full pack (with loops on the back for wearing or mounting to a wall) that you can print as a whole part or split up yourself. The third option is the same as the second but without any loops in the event you’d rather mount the pack in a custom way. None of these packs are hollow. If you wish to have a hollow pack, you’ll need to do editing on your own to get the desired modifications.

All parts were tested on a printer. The quality of your print depends on your preferred slicer software, printer, and settings. I can not guarantee the quality of your finished print.

I have done my best to minimize the need for supports, but they are needed on some parts. Slicing, supports, and rotating parts for best results recommended. To finish, sanding and painting will be required to achieve a metal like finish. Gluing and the application of fillers will be needed on the split version.

This print is to be used by the purchaser only and is not to be sold or distributed without proper permissions.
This is to be considered fan art.

Advertising